- .gitignore: add missing trailing newline
- Dockerfile: remove misleading || echo fallback in Playwright install
- index.ts: truncate long paths from beginning instead of end in warning box
- verify-claude-auth.ts: use effectiveAuthMethod to prevent undefined authType
- agent-context-parser.ts: handle claude-opus alias as Opus 4.6
- thinking-level-selector.tsx: improve model prop documentation
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Updated getStatusForProject method in AutoModeServiceCompat and its facade to be asynchronous, allowing for better handling of feature status retrieval.
- Modified related status handlers in the server routes to await the updated method.
- Introduced a new method, getRunningFeaturesForWorktree, in ConcurrencyManager to improve feature ID retrieval based on branch normalization.
- Adjusted BoardView component to ensure consistent handling of running auto tasks across worktrees.
These changes improve the responsiveness and accuracy of the auto mode feature in the application.
- Delete the 2705-line auto-mode-service.ts monolith
- Create AutoModeServiceCompat as compatibility layer for routes
- Create GlobalAutoModeService for cross-project operations
- Update all routes to use AutoModeServiceCompat type
- Add SharedServices interface for state sharing across facades
- Add getActiveProjects/getActiveWorktrees to AutoLoopCoordinator
- Delete obsolete monolith test files
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- features/routes/list.ts: Add facadeFactory parameter, use facade.detectOrphanedFeatures
- projects/routes/overview.ts: Add facadeFactory parameter, use facade.getRunningAgents/getStatusForProject
- features/index.ts: Pass facadeFactory to list handler
- projects/index.ts: Pass facadeFactory to overview handler
- auto-mode/index.ts: Accept facadeFactory parameter and wire to all route handlers
- All routes maintain backward compatibility with autoModeService fallback
- stop-feature.ts: Add facade parameter for feature stopping
- stop.ts: Add facadeFactory parameter for auto loop control
- verify-feature.ts: Add facadeFactory parameter for verification
- commit-feature.ts: Add facadeFactory parameter for committing
All routes maintain backward compatibility by accepting both
autoModeService (legacy) and facade/facadeFactory (new).
- status.ts: Add facadeFactory parameter for per-project status
- context-exists.ts: Add facadeFactory parameter for context checks
- running-agents/index.ts: Add facade parameter for getRunningAgents
All routes maintain backward compatibility by accepting both
autoModeService (legacy) and facade/facadeFactory (new).
Fix#684: Prevent Windows reserved filename creation
- Add sanitizeFilename() utility to detect and prefix Windows reserved names
(NUL, CON, PRN, AUX, COM1-9, LPT1-9)
- Apply sanitization to save-image route to prevent "nul" file creation
- Add 23 comprehensive tests for filename sanitization edge cases
Fix#576: Detect actual dev server port from output
- Parse stdout/stderr for real server URLs (Vite, Next.js, generic formats)
- Update server URL when detected instead of using allocated PORT
- Emit dev-server:url-detected event for frontend updates
- Add 6 tests for URL detection patterns
Fix#193: Commit only feature-specific changes
- Change from 'git add -A' to branch-aware file staging
- Use git diff to find files changed on feature branch only
- Prevent committing unrelated changes from other features
- Maintain backward compatibility with main branch workflow
All fixes include comprehensive tests and maintain backward compatibility.
Test results: 1,968 tests passed (547 package + 1,421 server tests)
* feat(terminal): Add core infrastructure for custom terminal configurations
- Add TerminalConfig types to settings schema (global & project-specific)
- Create RC generator with hex-to-xterm-256 color mapping
- Create RC file manager for .automaker/terminal/ directory
- Add terminal theme color data (40 themes) to platform package
- Integrate terminal config injection into TerminalService
- Support bash, zsh, and sh with proper env var injection (BASH_ENV, ZDOTDIR, ENV)
- Add onThemeChange hook for theme synchronization
Part of custom terminal configurations feature implementation.
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
* feat(terminal): Wire terminal service with settings service
- Pass SettingsService to TerminalService constructor
- Initialize terminal service with settings service dependency
- Enable terminal config injection to work with actual settings
This completes Steps 1-4 of the terminal configuration plan:
- RC Generator (color mapping, prompt formats)
- RC File Manager (file I/O, atomic writes)
- Settings Schema (GlobalSettings + ProjectSettings)
- Terminal Service Integration (env var injection)
Next steps: Settings UI and theme change hooks.
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
* feat(terminal): Add Settings UI and theme change synchronization
Complete Steps 5 & 6 of terminal configuration implementation:
Settings UI Components:
- Add PromptPreview component with live theme-aware rendering
- Add TerminalConfigSection with comprehensive controls:
* Enable/disable toggle with confirmation dialog
* Custom prompt toggle
* Prompt format selector (4 formats)
* Git branch/status toggles
* Custom aliases textarea
* Custom env vars key-value editor with validation
* Info box explaining behavior
- Integrate into existing TerminalSection
Theme Change Hook:
- Add theme detection in update-global settings route
- Regenerate RC files for all projects when theme changes
- Skip projects with terminal config disabled
- Error handling with per-project logging
- Inject terminal service with settings service dependency
This completes the full terminal configuration feature:
✓ RC Generator (color mapping, prompts)
✓ RC File Manager (file I/O, versioning)
✓ Settings Schema (types, defaults)
✓ Terminal Service Integration (env vars, PTY spawn)
✓ Settings UI (comprehensive controls, preview)
✓ Theme Synchronization (automatic RC regeneration)
New terminals will use custom prompts matching app theme.
Existing terminals unaffected. User RC files preserved.
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
* fix(terminal): Add error handling and explicit field mapping for terminal config
- Add try-catch block to handleToggleEnabled
- Explicitly set all required terminalConfig fields
- Add console logging for debugging
- Show error toast if update fails
- Include rcFileVersion: 1 in config object
This should fix the issue where the toggle doesn't enable after
clicking OK in the confirmation dialog.
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
* fix(terminal): Use React Query mutation hook for settings updates
The issue was that `updateGlobalSettings` doesn't exist in the app store.
The correct pattern is to use the `useUpdateGlobalSettings` hook from
use-settings-mutations.ts, which is a React Query mutation.
Changes:
- Import useUpdateGlobalSettings from mutations hook
- Use mutation.mutate() instead of direct function call
- Add proper onSuccess/onError callbacks
- Remove async/await pattern (React Query handles this)
This fixes the toggle not enabling after clicking OK in the confirmation dialog.
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
* fix(terminal): Use React Query hook for globalSettings instead of store
The root cause: Component was reading globalSettings from the app store,
which doesn't update reactively when the mutation completes.
Solution: Use useGlobalSettings() React Query hook which:
- Automatically refetches when the mutation invalidates the cache
- Triggers re-render with updated data
- Makes the toggle reflect the new state
Now the flow is:
1. User clicks toggle → confirmation dialog
2. Click OK → mutation.mutate() called
3. Mutation succeeds → invalidates queryKeys.settings.global()
4. Query refetches → component re-renders with new globalSettings
5. Toggle shows enabled state ✓
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
* debug(terminal): Add detailed logging for terminal config application
Add logging to track:
- When terminal config check happens
- CWD being used
- Global and project enabled states
- Effective enabled state
This will help diagnose why RC files aren't being generated
when opening terminals in Automaker.
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
* Fix terminal rc updates and bash rcfile loading
* feat(terminal): add banner on shell start
* feat(terminal): colorize banner per theme
* chore(terminal): bump rc version for banner colors
* feat(terminal): match banner colors to launcher
* feat(terminal): add prompt customization controls
* feat: integrate oh-my-posh prompt themes
* fix: resolve oh-my-posh theme path
* fix: correct oh-my-posh config invocation
* docs: add terminal theme screenshot
* fix: address review feedback and stabilize e2e test
* ui: split terminal config into separate card
* fix: enable cross-platform Warp terminal detection
- Remove macOS-only platform restriction for Warp
- Add Linux CLI alias 'warp-terminal' (primary on Linux)
- Add CLI launch handler using --cwd flag
- Fixes issue where Warp was not detected on Linux systems
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com>
- Enhanced getClaudeAuthIndicators() to return detailed check information
including file paths checked and specific error details for debugging
- Added debug logging to server startup credential detection for easier
troubleshooting in Docker environments
- Show paths that were checked in the warning message to help users debug
mount issues
- Added support for CLAUDE_CODE_OAUTH_TOKEN environment variable
- Return authType in verify-claude-auth response to distinguish between
OAuth and CLI authentication methods
- Updated UI to show specific success messages for Claude Code subscription
vs generic CLI auth
- Added Docker troubleshooting tips to sandbox risk dialog
- Added comprehensive unit tests for OAuth credential detection scenarios
Closes#721🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Git initialization now explicitly specifies --initial-branch=main to match
GitHub's default branch standard (since October 2020). This prevents the
branch name mismatch that caused features to disappear from the UI when
pushing to GitHub.
Fixes#734🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Fix setProjectCustomIcon using wrong property name (customIcon -> customIconPath)
- Add currentProject state update to setProjectIcon and setProjectCustomIcon
- Fix data URL regex to handle all formats (e.g., charset=utf-8 in GIFs)
- Increase project icon size limit from 2MB to 5MB for animated GIFs
- Add toast notifications for upload validation errors
- Add image error fallback to folder icon in project switcher
- Make HttpApiClient get/put methods public for store access
- Fix TypeScript errors in app-store.ts (trashedAt type, font properties)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Simplified the graceful shutdown process by removing redundant error handling for marking features as interrupted, as it is now managed internally.
- Updated orphan detection logging to streamline the process and enhance clarity.
- Added logic to preserve specific pipeline statuses when marking features as interrupted, ensuring correct resumption of features after a server restart.
- Enhanced unit tests to cover new behavior for preserving pipeline statuses and handling various feature states.
- Add graceful shutdown handler that marks running features as 'interrupted'
before server exit (SIGTERM/SIGINT)
- Add 30-second shutdown timeout to prevent hanging on exit
- Add orphan detection to identify features with missing branches
- Add isFeatureRunning() for idempotent resume checks
- Improve resumeInterruptedFeatures() to handle features without saved context
- Add 'interrupted' status to FeatureStatusWithPipeline type
- Replace console.log with proper logger in auto-mode-service
- Add comprehensive unit tests for all new functionality (15 new tests)
Fixes#696🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Address PR #688 review feedback from CodeRabbit: When a GitHub PR fetch
fails and we return stale cached data, also update the fetchedAt timestamp.
This prevents the original TTL from expiring and causing every subsequent
poll to retry the failing request, which would still hammer GitHub during
API outages.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Address PR #688 review feedback: previously the cache was deleted before
fetch, causing repeated API calls if the fetch failed. Now the cache entry
is preserved and stale data is returned on failure, preventing unnecessary
API calls during GitHub API flakiness or temporary outages.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Fixes#685
This commit addresses the GitHub API rate limit issue caused by excessive worktree PR status fetching.
## Changes
### Server-side PR caching (list.ts)
- Added `GitHubPRCacheEntry` interface and `githubPRCache` Map
- Implemented 2-minute TTL cache for GitHub PR data
- Modified `fetchGitHubPRs()` to check cache before making API calls
- Added `forceRefresh` parameter to bypass cache when explicitly requested
- Cache is properly cleared when force refresh is triggered
### Frontend polling reduction (worktree-panel.tsx)
- Increased worktree polling interval from 5 seconds to 30 seconds
- Reduces polling frequency by 6x while keeping UI reasonably fresh
- Updated comment to reflect new polling strategy
### Type improvements (use-worktrees.ts)
- Fixed `fetchWorktrees` callback signature to accept `silent` option
- Returns proper type for removed worktrees detection
## Impact
- Combined ~12x reduction in GitHub API calls
- 2-minute cache prevents repeated API hits during normal operation
- 30-second polling balances responsiveness with API conservation
- Force refresh option allows users to manually update when needed
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
- Introduced a dedicated 5-minute timeout for Codex models during feature generation to accommodate slower response times when generating 50+ features.
- Updated the CodexProvider to utilize this extended timeout based on the reasoning effort level.
- Enhanced the feature generation logic in generate-features-from-spec.ts to detect Codex models and apply the appropriate timeout.
- Modified the model resolver to include reasoning effort in the resolved phase model structure.
This change improves the reliability of feature generation for Codex models, ensuring they have sufficient time to process requests effectively.
- Throw error immediately when JSON extraction fails in
generate-features-from-spec.ts to avoid redundant parsing attempt
(feedback from Gemini Code Assist review)
- Emit spec_regeneration_error event before throwing for consistency
- Fix TypeScript cast in sync-spec.ts by using double cast through unknown
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
This fixes the app spec generation failing for non-Claude models (Cursor, Gemini,
OpenCode, Copilot) that don't support structured output capabilities.
Changes:
- Add `supportsStructuredOutput()` utility function in @automaker/types to
centralize model capability detection
- Update generate-features-from-spec.ts:
- Add explicit JSON instructions for non-Claude/Codex models
- Define featuresOutputSchema for structured output
- Pre-extract JSON from text responses using extractJsonWithArray
- Handle both structured_output and text responses properly
- Update generate-spec.ts:
- Replace isCursorModel with supportsStructuredOutput for consistency
- Update sync-spec.ts:
- Add techStackOutputSchema for structured output
- Add JSON extraction fallback for text responses
- Handle both structured_output and text parsing
- Update validate-issue.ts:
- Use supportsStructuredOutput for cleaner capability detection
The fix follows the same pattern used in generate-spec.ts where non-Claude models
receive explicit JSON formatting instructions in the prompt and responses are
parsed using extractJson utilities.
Fixes#669🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* feat: add GitHub Copilot SDK provider integration
Adds comprehensive GitHub Copilot SDK provider support including:
- CopilotProvider class with CLI detection and OAuth authentication check
- Copilot models definition with GPT-4o, Claude, and o1/o3 series models
- Settings UI integration with provider tab, model configuration, and navigation
- Onboarding flow integration with Copilot setup step
- Model selector integration for all phase-specific model dropdowns
- Persistence of enabled models and default model settings via API sync
- Server route for Copilot CLI status endpoint
https://claude.ai/code/session_01D26w7ZyEzP4H6Dor3ttk9d
* chore: update package-lock.json
https://claude.ai/code/session_01D26w7ZyEzP4H6Dor3ttk9d
* refactor: rename Copilot SDK to Copilot CLI and use GitHub icon
- Update all references from "GitHub Copilot SDK" to "GitHub Copilot CLI"
- Change install command from @github/copilot-sdk to @github/copilot
- Update CopilotIcon to use official GitHub Octocat logo
- Update error codes and comments throughout codebase
Co-Authored-By: Claude <noreply@anthropic.com>
* fix: update Copilot model definitions and add dynamic model discovery
- Update COPILOT_MODEL_MAP with correct models from CLI (claude-sonnet-4.5,
claude-haiku-4.5, claude-opus-4.5, claude-sonnet-4, gpt-5.x series, gpt-4.1,
gemini-3-pro-preview)
- Change default Copilot model to copilot-claude-sonnet-4.5
- Add model caching methods to CopilotProvider (hasCachedModels,
clearModelCache, refreshModels)
- Add API routes for dynamic model discovery:
- GET /api/setup/copilot/models
- POST /api/setup/copilot/models/refresh
- POST /api/setup/copilot/cache/clear
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* refactor: use @github/copilot-sdk instead of direct CLI calls
- Install @github/copilot-sdk package for proper SDK integration
- Rewrite CopilotProvider to use SDK's CopilotClient API
- Use client.createSession() for session management
- Handle SDK events (assistant.message, tool.execution_*, session.idle)
- Auto-approve permissions for autonomous agent operation
- Remove incorrect CLI flags (--mode, --output-format)
- Update default model to claude-sonnet-4.5
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* fix: add Copilot and Gemini model support to model resolver
- Import isCopilotModel and isGeminiModel from types
- Add explicit checks for copilot- and gemini- prefixed models
- Pass through Copilot/Gemini models unchanged to their providers
- Update resolver documentation to list all supported providers
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* fix: pass working directory to Copilot SDK and reduce event noise
- Create CopilotClient per execution with correct cwd from options.cwd
- This ensures the CLI operates in the correct project directory, not the
server's current directory
- Skip assistant.message_delta events (they create excessive noise)
- Only yield the final assistant.message event which has complete content
- Clean up client on completion and error paths
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* fix: simplify Copilot SDK execution with sendAndWait
- Use sendAndWait() instead of manual event polling for more reliable
execution
- Disable streaming (streaming: false) to simplify response handling
- Increase timeout to 10 minutes for agentic operations
- Still capture tool execution events for UI display
- Add more debug logging for troubleshooting
- This should fix the "invalid_request_body" error on subsequent calls
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* fix: allow Copilot model IDs with claude-, gemini-, gpt- prefixes
Copilot's bare model IDs legitimately contain prefixes like claude-,
gemini-, gpt- because those are the actual model names from the
Copilot CLI (e.g., claude-sonnet-4.5, gemini-3-pro-preview, gpt-5.1).
The generic validateBareModelId function was incorrectly rejecting
these valid model IDs. Now we only check that the copilot- prefix
has been stripped by the ProviderFactory.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* feat: enable real-time streaming of tool events for Copilot
- Switch back to streaming mode (streaming: true) for real-time events
- Use async queue pattern to bridge SDK callbacks to async generator
- Events are now yielded as they happen, not batched at the end
- Tool calls (Read, Write, Edit, Bash, TodoWrite, etc.) show in real-time
- Better progress visibility during agentic operations
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* feat: expand Copilot tool name and input normalization
Tool name mapping additions:
- view → Read (Copilot's file viewing tool)
- create_file → Write
- replace, patch → Edit
- run_shell_command, terminal → Bash
- search_file_content → Grep
- list_directory → Ls
- google_web_search → WebSearch
- report_intent → ReportIntent (Copilot-specific planning)
- think, plan → Think, Plan
Input normalization improvements:
- Read/Write/Edit: Map file, filename, filePath → file_path
- Bash: Map cmd, script → command
- Grep: Map query, search, regex → pattern
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* fix: convert git+ssh to git+https in package-lock.json
The @electron/node-gyp dependency was resolved with a git+ssh URL
which fails in CI environments without SSH keys. Convert to HTTPS.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* fix: address code review feedback for Copilot SDK provider
- Add guard for non-text prompts (vision not yet supported)
- Clear runtime model cache on fetch failure
- Fix race condition in async queue error handling
- Import CopilotAuthStatus from shared types
- Fix comment mismatch for default model constant
- Add auth-copilot and deauth-copilot routes
- Extract shared tool normalization utilities
- Create base model configuration UI component
- Add comprehensive unit tests for CopilotProvider
- Replace magic strings with constants
- Add debug logging for cleanup errors
* fix: address CodeRabbit review nitpicks
- Fix test mocks to include --version check for CLI detection
- Add aria-label for accessibility on refresh button
- Ensure default model checkbox always appears checked/enabled
* fix: address CodeRabbit review feedback
- Fix test mocks by creating fresh provider instances after mock setup
- Extract COPILOT_DISCONNECTED_MARKER_FILE constant to common.ts
- Add AUTONOMOUS MODE comment explaining auto-approval of permissions
- Improve tool-normalization with union types and null guards
- Handle 'canceled' (American spelling) status in todo normalization
* refactor: extract copilot connection logic to service and fix test mocks
- Create copilot-connection-service.ts with connect/disconnect logic
- Update auth-copilot and deauth-copilot routes to use service
- Fix test mocks for CLI detection:
- Mock fs.existsSync for CLI path validation
- Mock which/where command for CLI path detection
---------
Co-authored-by: Claude <noreply@anthropic.com>
- Change 'waiting_approval' status to 'in_progress' and add handling for 'waiting_approval' as pending.
- Introduce counting of live running features per project in the overview handler by fetching all running agents.
- Ensure accurate representation of project statuses in the overview.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
- Add 'waiting' status to computeHealthStatus for projects with pending
features but no active execution (fixes status never being emitted)
- Fix undefined RunningAgentInfo type to use local RunningAgent interface
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
Keyboard accessibility:
- Add role="button", tabIndex, onKeyDown, and aria-label to clickable divs
in project-status-card, recent-activity-feed, and running-agents-panel
Bug fixes:
- Fix handleActivityClick to use projectPath instead of projectId for
initializeProject and check result before navigating
- Fix error handling in use-multi-project-status to use data.error string
directly instead of data.error?.message
Improvements:
- Use GitBranch icon instead of Folder for branch display in running-agents-panel
- Add error logging for failed project loads in overview.ts
- Use type import for FeatureLoader in projects/index.ts
- Add data-testid to mobile Overview button in dashboard-view
- Add locale options for consistent time formatting in overview-view
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
